High quality and trust worthy chemical supplier | Orachemicals.in

Newsorachemicals

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



About Antimony Telluride Sb2Te3 powder:
Antimony telluride chemical formula Sb2TE3.Molecular weight 626.30.Gray solid.Melting point 639℃, relative density 6.5018. Dissolve in nitric acid. Antimony telluride is a covalent bond, ionic bond, has a certain van der Waals bond composition, triangular crystal system, the original cell is rhombus hexahedron.
Like other alveolar sulfide layered materials antimony, telluride is a gray crystalline solid with a layered structure. The layer consists of two atomic antimony and three atomic protein sheets and is held by weak van der Waals forces.Sb2Te3 is a narrow-gap semiconductor with a bandgap of 0.21eV. It is also a topological insulator and thus exhibits thickness-dependent physical properties.
Sb2Te3 has a rhomboid crystal structure. The crystalline material consists of covalently bonded atoms to form five atom-thick sheets (in order: Te-Sb-Te-Te), holding the plates together with the Van der Waals attraction. Due to its lamellar structure and weak interlamellar forces, the bulk telluride can be mechanically stripped to separate the monolayers. Antimony and bismuth, like other binary choline, have been studied as semiconductor properties of Sb2Te3. By doing it with appropriate dopants, it can be converted to N-type and P-type semiconductors. Feel free to send an inquiry to get the latest price if you would like to buy Antimony Telluride Sb2Te3 powder in bulk.

Features of Antimony Telluride Sb2Te3 powder:

Antimony telluride is an inorganic compound, the chemical formula is Sb2Te3. It is a gray crystal, but the melting point, density and color may depend on the crystal type used.Gray solid, Melting Point: 629℃, Density: 6.5 g/mL at 25 centigrade(lit.)  
 

Specification of Antimony Telluride Sb2Te3 powder:

 

Item

Purity

APS

Color

shape

energy gap

Melting Point

electrical resistivity

Thermoelectric quality department

Tr-Sb2Te3

99.99%-99.9999%

100mesh

Gray crystal

powder,granule,block

0.23eV

620℃

3×10-6Ω·

0.9×10-3/K

Note: according to user requirements can provide different size products.

Technical Parameter of Antimony Telluride Sb2Te3 powder:

                        Certificate of Antimony Telluride (%)  
PurityCuAgMgNiBiInFeCd
99.99≤5 ppm≤2 ppm≤5 ppm≤5 ppm≤5 ppm≤5 ppm≤5 ppm≤10 ppm


How is Antimony Telluride Sb2Te3 powder produced?
Telluride antimony preparation is as follows: using SbCl3 and K2TeO3 as starting materials, according to the stoichiometric ratio of n (SbCl3): n (K2TeO3) = 2:3 said take 0.002 mol SbCl3 and 0.003 mol K2TeO3, 250 ml and join the two round bottom flask, and then add in the 0.5 g polyvinylpyrrolidone, 80 ml 0.5 gNaOH and a reduction of diethylene glycol (take) by the measuring cylinder, put two round bottom flask temperature control heating jacket, set the temperature of 240 ° C, insulation 4 h, adjusting the rotational speed of 500 r/min.After the temperature of the reactants dropped to room temperature, the centrifuge was centrifuged 3 times with isopropyl alcohol and acetone, respectively. The centrifuge speed was set at 4000r/min, and the time was 4min. At the end of centrifugation, the upper liquid became colorless. The temperature of the reactant is reduced to 100 ml of centrifuge tube at room temperature, and the centrifugal is centrifuged with isopropanol and acetone. Black precipitate was taken out in an oven for 6 h and finally gave a black Sb2Te3 powder.
 
Application of Antimony Telluride Sb2Te3 powder:
Like other antimony and bismuth binary chalcogenides, the semiconducting properties of Sb2Te3 have been investigated. It can be converted to N-type and P-type semiconductors by doping appropriate dopants.
Compared with the single-frequency detection of pure Sb2Te3, iron-doped Sb2Te3 introduces multiple Fermi pockets, resulting in lower carrier density and mobility.
Sb2Te3 and germanium telluride (GeTE) form a pseudo-binary intermetallic germanium antimony telluride system.
Antimony telluride, like bismuth telluride and Bi2Te3, is used in solid-state refrigerators because of its strong thermoelectric effect.

Storage Condition of Antimony Telluride Sb2Te3 powder:

Keep the reservoir sealed and stored in a cool and dry place, Make sure that the workshop has good ventilation or exhaust devices.

Packing & Shipping of Antimony Telluride Sb2Te3 powder:
We have many different kinds of packing which depend on the Antimony Telluride Sb2Te3 powder quantity.
Antimony Telluride Sb2Te3 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Antimony Telluride Sb2Te3 powder shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.
Antimony Telluride Powder Sb2Te3 Cas 1327-50-0插图

 

Antimony Telluride Powder Properties

Other NamesAntimony(III) Diantimony tritelluride, Antimony(3+) telluride, Antimony
sesquitelluride
CAS No.1327-50-0
Compound FormulaSb2Te3
Molecular Weight626.32
AppearanceGrey Solid
Melting Point580 °C (1076 °F)
Solubility in waterN/A
Density6.5 g/cm3
Purity99.99%
Particle Size-80mesh, -100mesh
Boling pointN/A
Specific HeatN/A
Thermal ConductivityN/A
Thermal ExpansionN/A
Young’s ModulusN/A
Exact Mass250.810043
Monoisotopic MassN/A
  
  

Antimony Telluride Powder Health & Safety Information

Safety WarningWarning
Hazard StatementsH302-H332-H411
Flashing pointN/A
Hazard CodesN/A
Risk CodesN/A
Safety StatementsN/A
RTECS NumberN/A
Transport InformationN/A
WGK Germany3
Inquiry us