High quality and trust worthy chemical supplier | Orachemicals.in


The melting point is the highest temperature at which a metal will melt. Metals that pass this point will solidify when cooled. When a metal reaches this point, it is no longer useful for its intended purpose.

There are several different factors that affect the melting point. Some of these factors include pressure and alloy composition. If you are working on a project that requires the use of a particular metal, it is important to research the melting point before you begin. This will ensure that you know exactly what you are doing.

Nickel has a high melting point. It can melt at temperatures around 1,452 degC. This is a lot higher than the melting point of other common metals such as copper.

Typically, nickel is used as an alloy with other metals such as copper and iron. Nickel is also used to form protective coatings on other metals. Copper and nickel are the most commonly used metals for this purpose.

Nickel can be fabricated using standard hot and cold working methods. However, it is important to remember that nickel can be a very difficult metal to work with. To avoid this, it is best to be as fine as possible.

A new nickel melting process has been discovered. This process is more economical and produces a practically pure metal. During this process, large amounts of air are used under great pressure to raise the temperature of the nickel.

Because the process involves huge amounts of air, it is important to heat the crucible to a high temperature. This usually takes about one and a half hours. Once the nickel has melted, it falls into a suitable receptacle.

Inquiry us