High quality and trust worthy chemical supplier | Orachemicals.in

Newsorachemicals

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



What is zirconia

Zirconium is a primary oxide with the chemical formula ZrO2. Normal conditions produce a white, odorless crystal. It’s insoluble in hydrochloric and dilute acid, but it is water-soluble. Chemical properties do not exist. Its properties include high melting points, high resistivity and high refractive indices, as well as low thermal expansion coefficients. This makes it a ceramic insulating and sunscreen material that is resistant to high temperatures. It is also used as the main raw materials for artificial drills.

How to prepare zirconia

1. Chemical Method (Alkali Metal Method)

Sodium zirconate is produced by adding zircon concentrate to caustic soap at high temperatures. The sodium zirconate, washed in concentrated hydrochloric to produce zirconium dioxide (ZH), Cl2, is then dried with a slurry of ammonia water. The zirconium oxide SH2OX is dissolved in water and then ammonia-water is added to precipitate the Zr(OH). You can burn Zr(OH1S), to get zirconia.

It is possible to add hydrochloric, or sulfuric, acid to the precipitate after melting zircon (Zr(OH), Na2ZrO3, and undecomposed product, etc.). Zr(OH), prepared by acid leaching followed by precipitation removal and ammonia-water, is obtained after removing precipitation. The zircon can also be added to alkaline earth metal carbonates or oxides, then calcined into calcium zirconate. Finally, it is boiled in hydrochloric to remove the impurities and obtain zirconia.


2. Electrofusion method for Zirconia preparation

Reduced desalination and zirconium enrichment are achieved by melting and reducing zirconium in an electric furnace. In an electric furnace, at 2700 degrees, zircon is completely decomposed, resulting in liquid ZrO2 or SiO2. At the same time SiO2 can decompose into gaseous siO2 or O2, which is also a reversible action.


Two methods are available for the preparation of stable zirconia using the electric melt method: primary melting and secondary melting. For the primary electric melting method, you need to mix zircon powder with graphite and stabilizers (usually CaCO3). Add them to an electric furnace and melt. After the ZrO2 is fused, it is quenched in order to promote crystallization. In the second electric melting method the zircon powder is mixed with graphite, then melted and quenched in an electric furnace. Then, it is lightly burnt (around 1400degC), resulting in mZrO2. The m-ZrO2 mixed in the specified proportion is added to an electric arc melting furnace, quenched, and then lightly burned (about 1400degC) to obtain m-ZrO2.


(aka. Technology Co. Ltd., a trusted global chemical materials supplier & manufacture with more than 12 years experience in the supply of super high-quality nanomaterials and chemicals. The ZrO2 produced by our company is of high purity and has a low impurity level. If you need lower, please contact our company.