thermal-High quality and trust worthy chemical supplier

Blog

Study on nano aluminum nitride in thermal conductive plastics

admin / 2023-03-28 / no Comments

What is aluminum Nitride? Aluminum nitride AIN crystal exhibits a wurtzite structure and is a hexagonal system that contains a tetrahedral-covalent bond compound. Chemical composition AI 65.81% and N 34.19%. Specific gravity 3.261g/cm3, white-colored transparent single crystals, sublimation temperature of 2450 under atmospheric pressure. It is a heat and high temperature resistant material. Aluminum nitride can resist molten aluminium, other molten metallics and gallium arsenide.
Performance index for aluminum nitride
(1) The thermal conductivity is high (about 320W/m*K), which is close to SiC. It is more than 5x higher than Al2O3
(2) Matching the thermal expansion coefficient (4.5x10-6), Si (3.54x10-6), and GaAs (6x10-6).
(3) various electrical properties (dielectric constant, dielectric loss, body resistivity, dielectric strength) excellent;
(4) The mechanical properties of BeO and Al2O3 ceramics are superior to their flexural strength. They can also be atmospheric sintered.
(5) Good optical transmission properties;
(6) non-toxic.

Application to nano aluminum nitride within thermal conductive materials
1, Thermal conductive Silica Gel and Thermal conductive Ethyl Resin
Nano AlN composite silica Gel with high thermal conductivity is extremely efficient. It has excellent thermal conductivity, good insulation, low consistency, and excellent construction performance. These products can replace or exceed imported products, and are used extensively in electronic devices heat transfer medium, improving work efficiency. For example, filling the gap between CPU and radiator, high power transistor, silicon-controlled components, diodes, as well as the substrate in direct contact with the thin seam heat exchange medium. Nano thermal paste is used to close the gap between IC/audion and heatsink, increase their contact area, and achieve better heat dissipation.

2, thermal conductive plastics application:
Powders of nano aluminum nitride can significantly improve the thermal conductivity. By adding the experimental product to plastic in a 5-10% ratio, the plastic's thermal conductivity can be increased from 0.33 to 5. Thermal conductivity rose by 16 times. The thermal conductivity additive on the market today has more advantages than this one. It can be used to improve the mechanical properties and the thermal conductivity effect, as well as reduce the amount of thermal conductivity filler. Current nano aluminum Nitride powders have been purchased by relevant manufacturers on a large scale. Then, new nano thermally conductive plastics will go on the market.

3. Other areas of application:
Nano aluminum is used for smelting nonferrous metals, semiconductor gallium arsenide, crucible, evaporationboat, thermocouple protectiontube, heat insulation and microwave dielectric materials. The current application and PI resin are also available.

Tech Co., Ltd. is a professional supplier for nitride products. We have over 12 years of experience in chemical products development and research. We accept payments via Paypal, T/T or Credit Card. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
Send an inquiry if you're looking for aluminum nitride powder of high quality.

Blog

Advantages of Aluminum Nitride Powder

admin / 2023-03-22 / no Comments

Aluminum nitride It is an aluminium solid nitride that has excellent thermal and electric conductivity. It has an excellent band gap of 6 eV at ambient temperature and is being used in optoelectronics. Below are some examples of its properties and their applications.

Very high thermal conductivity

Aluminum nitride is one of the newest materials in technical ceramics. It was originally discovered nearly a century back, but it is only now that it can be made into a viable commercial material. It can be used to make composite materials, and it is especially good at improving mechanical properties.
A material's thermal conductivity refers to its ability to heat transfer when exposed to temperature variations. Reticulular vibrations are also called phonons and aluminum nitride is capable of carrying heat. This property is common in materials with covalent bonds and low atomic mass. There are many factors that affect thermal conductivity. These include temperature, impurities and even the presence of heat.

Aluminium nitride exhibits high thermal and electric conductivity making it an attractive material for electronics. Thermal conductivity for polycrystalline AlN ceramics is between 17 and 285 W/mK. It is the process of sintering that determines the difference between single-crystalline and multicrystalline ceramics. This is what determines the microstructure of the material and its conduction mechanism.

AlN can also be machined to create complex shapes. AlN's high thermal conductivity is not only impressive, but it also has exceptional heat radiation and electric insulation. AlN can be machined to complex shapes, making it suitable for high-power electronic applications.

Microelectronics uses aluminum nitride as a standard material. The material's excellent thermal conductivity makes them a perfect medium to heat sinks or electrical insulators. The material can be used in silicon-based products because it does not react with many chemicals or gases.

Aluminum nitride (or aluminum nitride) is an innovative ceramic that has excellent electrical and thermal properties. The cost of aluminum Nitride is quite high so domestic production remains a problem. However, scientists are trying to resolve this issue. These developments could lead to aluminum nitride being a viable option for high-end semiconductor packaging.

It is the heat transfer rate between two materials. Thermal conductivity is the rate at which heat transfers between two materials. A single crystal has higher thermal conductivity than one with non-conducting. This is an important property in a semiconductor. It should be considered when designing a material for a particular application.

Electric insulator strong

Aluminum nitride exhibits excellent thermal conductivity as well as electrical insulation, which makes it ideal for high-powered electronic applications. This metal is a good choice for power electronics because of its similar mechanical and electrical characteristics to silicon. You can use it for microwave tubes or hybrid circuits. It is capable of being fabricated in complex geometries with no loss of its electrical insulating qualities.

Aluminium Nitride is a good material for high-frequency electronics as well as high-voltage devices. The semiconductor industry uses aluminum nitride as a substitute for Beryllium Oxide due to its low thermal expansion. Additionally, the material is safe to machine and it matches silicon wafers in CTE. It's a good choice for high-temperature electronics.

AlN offers excellent electrical insulation with a low constant dielectric, which makes it ideal for various electronic applications. Additionally, AlN's surface can be metallized in order to create thin films. These are great for electronics circuits, wiring bonding and chip mount.

Aluminum nitride has another property: it's stable at very high temperatures. However, at 700 degrees Celsius, the material oxidizes to form a layer of aluminum oxide. Although it is very stable in the carbon dioxide and hydrogen atmospheres, it does not dissolve quickly in water. Aluminum nitride's low electrical conductivity makes it a popular choice for electronics.

F. Briegleb & A. Geuther first synthesized aluminum nitride 1862. Aluminium nitride is superconductive under high pressures despite having a low density. This material also exhibits excellent thermal conductivity. These properties make it a popular choice for semiconductor devices.

Resistance to molten metallics

An aluminum nitride ceramic compound is resistant to thermal shock and abrasion. You can use it in many applications to prevent metals from corrosion and abrasion. It has particles sizes between 0.2 micrometers and 5 micrometers. The general rule of thumb is that a higher content will give you better resistance to abrasion.

Aluminum nitride belongs to the hexagonal glass system and is a covalent bonds compound. It can be gray or off white in color, and it is great for insulation materials. Aluminum liquid cannot penetrate it because of its high thermal conductivity. Aluminium nitride, however, has a low thermal conductivity as well as oxidation resistance. Additionally, it is susceptible to absorb moisture and undergo hydrolysis. Additionally, the temperature at which it can decompose is 2516° Celsius. However, aluminum nitride can be used as a metal of high quality that is resistant to corrosion and heat.

Aluminum nitride can be used to make stronger structural materials than alumina. Additionally, it has high hardness as well as abrasion resistance. But, it has lower mechanical strength than alumina and thermal shock resistant. It is not recommended for use in composites because of this.

The material also has good melting resistance and adhesion. Aluminium nitride makes a good choice when it comes to molten-metal applications. This metal can be used to make molten members. To avoid rupture, however, the member must exhibit good adhesion.

Protective coatings for foundries can be made from aluminum nitride. It's inexpensive and straightforward to make. It also resists corrosion. But, it may not completely resist molten aluminium. Additives may affect its ability to resist molten metals.

Aluminium nitride, in addition to being resistant to molten metallics has good adhesion properties and melt loss resistance. Aluminium nitride offers better adhesion and resistance to heat shock than aluminum oxide. Aluminum oxide has a tendency to fracture and crack. Additionally, the aluminum oxide has a weight of 90 wt. % of Boron

The product sintered was evaluated for resistance to thermal shock, melting loss, adhesion and molten steel. For ten minutes the test item was submerged in molten iron before being removed. A 4-point bending test was used to measure the adhesion.

Aluminum Nitride Powder Price

Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity. Unexpected events.
For the most up-to-date aluminum nitride price, please send an inquiry. (brad@ihpa.net)

Aluminum Nitride Powder Supplier

Technology Co. Ltd. has over 12 years of experience as a reliable supplier and manufacturer of aluminum nitride powder. All of our products are available for shipment worldwide.

You can find high-quality aluminum powder in our online store. Get in touch You can also send us an inquiry. (brad@ihpa.net)

Blog

Spherical Alumina Powder And The Applications of Spherical Alumina

admin / 2023-03-03 / no Comments

One of the thermal conductive material is aluminum. Spherical aluminum oxide has made it a "star product". Spherical alu is a popular choice in areas such as thermal management and vehicles that consume high amounts of energy, 5G, and other newer energy vehicles. In addition to its thermal conductive properties, spherical alu is used extensively in advanced ceramics, catalysis and grinding, polishing and polishing and other composite materials.

Spherical Al2O3 Property

Because of their many crystal shapes and unique chemical and physical properties, Alumina and its Hydrate are used widely in electronics, petrochemical industries, refractories and ceramics. Alumina's application capabilities in many areas are directly related to their morphology. Of all the different types of powder particles, the Al2O3 spherical particles are the most common. These particles exhibit a more regular morphology with a lower specific surface area and greater packing density. This can significantly improve product performance.

Spherical Application

Used as Spherical Allumina Powder Thermal Conductive Materials The most significant use of spherical aluminum is thermal conductive material. Spherical alumina can be classified as thermal interface material, thermal-conductive engineering plastics and thermally conductive plastic sealing substances. The thermal interface materials can be used to IC packaging or electronic heat loss. These materials fill in any gaps caused by contact between the materials. This reduces the heat transfer resistance and improves heat dissipation. Inorganic thermal filler sphere alumina is common. Its thermal conductivity can reach 3042W/m K.

Ceramics using Spherical Allumina Powder
The properties of ceramics can be greatly affected by adding spherical amounts of alumina powder to their production processes. Low temperature brittleness in ceramics has a significant impact on their ability to be used for various purposes. For low-temperature plastic ceramics, you can use ceramic materials with spherical aluminum powder. Additionally, ceramics can be made tougher by using spherical-alumina. It can increase the ceramics' toughness by reducing the sintering temperatures and if the powder contains 5.0%.

As a polishing agent, use Spherical Allumina Powder
Spherical or flake-alumina alumina offers better fluidity and dispersion than conventional granular or flake. Because spherical powder abrasives are evenly distributed within polished products, there is no possibility for powder to accumulate in large quantities. The particle surface can also be smooth, which helps avoid scratches and improves polishing.

Spherical Led luminaire Use Both its catalyst and its transporter
High chemical activity is possible because of the large amount of unsaturated chemical bonding and catalytic activ centers that are found on the surface. Spherical Alumina offers the benefits of high chemical activity, low wear, and long service lives. It also boasts a large specific area. It is impossible to replace the performance and characteristics of the catalyst made of spherical aluminum with other materials.

Spherical Alumina Use in 3D printing
Due to its strong strength, high spheroidization rate and resistance to high temperatures, 3D printing is a popular use of sphered-alumina. The advantages of spherical allumina powder include high solid content and good fluidity. They also have high mechanical and chemical properties.

Spherical al2O3 powder price

Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity. Unexpected events.
Send us an email to get the best price for Al2O3 powder. (brad@ihpa.net)

Supplier Of Al2O3 Pulp

Technology Co. Ltd. (), is an Al2O3 supplier and manufacturer. We have over 12 years experience. All of our products can be shipped around the world.

You can contact me if you're looking for aluminum oxide powder of high quality. Get in touch You can also send us an inquiry. (brad@ihpa.net)

Blog

The Thermal Expansion Coefficient of Silicon Nitride

admin / 2023-02-17 / no Comments

Silicon nitride is a nonferrous alloy that is characterized by low thermal conductivity, excellent fracture toughness and chemical resistance. These properties make silicon nitride suitable for aerospace applications. However, it is a costly material. Therefore, manufacturers are interested in obtaining a high strength-to-weight ratio for their components.

Thermal expansion coefficients of silicon nitride thin films are measured using a double substrate technique. The coefficients are then expressed as a function of the inverse cube root of the amorphous Si volume fraction.

The linear thermal expansion coefficient of silicon nitride is 3.3 g 10 G 6 at 300 K and 6.5 g 10 G 6 at 1000 K. It is lower than the values found for other nitride compounds.

The thermal expansion coefficient is a useful property for materials scientists. It is also called biaxial Young's modulus. Although the coefficient varies slightly, it is useful for the study of silicon nitride.

When silicon nitride thin films are deposited in a mixture of dichlorosilane and ammonia, the differential thermal stress is induced. This is a result of compositionally induced intrinsic strain in the film. In addition to the stress, there is a residual stress that is dependent on the substrate temperature.

In the case of amorphous Si, the volumetric dilation of the basal Si-SiyN4-y tetrahedra is consistent with substitution of Si for N. Moreover, the thermal Gr neisen parameter is larger in cubic silicon nitride.

The thermal expansion coefficient of silicon nitride ceramics is also reviewed. They are engineered to provide optimal performance in extreme conditions.

Inquiry us [contact-form-7 id="26" title="tongrun-form"]