If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
What is Tin disulfide and how does it work? The inorganic compound Tin desulfide has a chemical composition of SnS2. It is a yellow hexagonal flake containing a CdI2 crystalline structure. It is very insoluble in water. However, it is easily soluble and soluble with aqua regia, hot alkaline solution, as well as sodium sulfide solution. This is often used to make golden paint.
Tin disulfide dissolves in hot alkali solution or aqua regia. It can also react with ammonium-sulfide to disperse.
How to prepare Tin Disulfide
Tin disulfide is made by mixing tin and sulfur with iodine. This reaction needs heating.
Sn + 2 SnS2
Another option is to pass hydrogen sulfuride into the Tin (IV) salt, or Tin (IV), salt solution and precipitate.
Electrochemical behaviour of multi-walled Carbon Nanotubes containing Tin Disulfide as Negative Electrode of Lithium Ion Battery
Multi-walled carbon-nanotube-confined metal-tin nanostructures were prepared using the direct current arc Plasma method. Brad@ihpa.net was then used as a precursor in methane, and finally brad@ihpa.net was obtained by the sulfurization process. Raman, Xray diffraction, and transmission electron microscopy were used to characterize the material. The length of the multi-walled, carbon nanotubes measured approximately 400nm. The surface carbon layer was well crystallized and the carbon layer thickness was around 10 nm. Sn brad@ihpa.net Nanostructures are used as anode material in lithium-ion battery. They show a good electrochemical performance. The first charge-discharge Coulomb efficiency of 71% is achieved, and after 50 cycles the capacity maintains 703?mAh?g-1. Brad@ihpa.net Nanostructured Electrodes have high-capacity properties due to the fact that different active materials provide different reactions platforms.
Study on electrochemical performance of tin disulfide/single-walled carbon nanotube composite material used as anode material for lithium-ion battery
The simple solvothermal process allowed for the creation of a new composite material consisting of SnS2 (SWCNTs), and single-walled, carbon nanotubes (SWCNTs). It has good electrochemical properties after being applied to the battery’s negative electrode. It maintains a specific capacity of 515 mAh/g even at high current density (1 A/g), after 100 cycles. To compare, we used the exact same method to synthesize one SnS2 materials and performed electrochemical tests. The SnS2 materials have a relatively high specific capacity but a poor cycle performance and decays rapidly after only 20 cycles. This composite material is superior in lithium-ion batteries because of its synergy with SnS2 (and SWCNTs).
Tin disulfide Supplier
(aka. Technology Co. Ltd. (aka. Our company is currently working on a number of materials. Our Tin diulfide has high purity, fine particle sizes, and very low impurity. To get the current price of Tin diulfide, please send us an e-mail or click on the required products to send an enquiry.
Tin disulfide dissolves in hot alkali solution or aqua regia. It can also react with ammonium-sulfide to disperse.
How to prepare Tin Disulfide
Tin disulfide is made by mixing tin and sulfur with iodine. This reaction needs heating.
Sn + 2 SnS2
Another option is to pass hydrogen sulfuride into the Tin (IV) salt, or Tin (IV), salt solution and precipitate.
Electrochemical behaviour of multi-walled Carbon Nanotubes containing Tin Disulfide as Negative Electrode of Lithium Ion Battery
Multi-walled carbon-nanotube-confined metal-tin nanostructures were prepared using the direct current arc Plasma method. Brad@ihpa.net was then used as a precursor in methane, and finally brad@ihpa.net was obtained by the sulfurization process. Raman, Xray diffraction, and transmission electron microscopy were used to characterize the material. The length of the multi-walled, carbon nanotubes measured approximately 400nm. The surface carbon layer was well crystallized and the carbon layer thickness was around 10 nm. Sn brad@ihpa.net Nanostructures are used as anode material in lithium-ion battery. They show a good electrochemical performance. The first charge-discharge Coulomb efficiency of 71% is achieved, and after 50 cycles the capacity maintains 703?mAh?g-1. Brad@ihpa.net Nanostructured Electrodes have high-capacity properties due to the fact that different active materials provide different reactions platforms.
Study on electrochemical performance of tin disulfide/single-walled carbon nanotube composite material used as anode material for lithium-ion battery
The simple solvothermal process allowed for the creation of a new composite material consisting of SnS2 (SWCNTs), and single-walled, carbon nanotubes (SWCNTs). It has good electrochemical properties after being applied to the battery’s negative electrode. It maintains a specific capacity of 515 mAh/g even at high current density (1 A/g), after 100 cycles. To compare, we used the exact same method to synthesize one SnS2 materials and performed electrochemical tests. The SnS2 materials have a relatively high specific capacity but a poor cycle performance and decays rapidly after only 20 cycles. This composite material is superior in lithium-ion batteries because of its synergy with SnS2 (and SWCNTs).
Tin disulfide Supplier
(aka. Technology Co. Ltd. (aka. Our company is currently working on a number of materials. Our Tin diulfide has high purity, fine particle sizes, and very low impurity. To get the current price of Tin diulfide, please send us an e-mail or click on the required products to send an enquiry.